Dynamic Wood Burner Range by Thermolux
$3,500.00
Out of stock
Need Finance?
Dynamic Wood Burner Range by Thermolux
Dynamic Wood Boiler Range by Thermalux
From: $3,800.00
- Large Homes suitable
- Domestic Hot Water
- Hydronic Heating
- 1 Year warranty
Hydronic Heating Boilers
These units are wood fired hydronic boilers – and are designed to heat a lot of hot water that can be used for Inslab Heating or heating Radiators (or a combination of both)
-
Where to Install These?
Wood boilers are a lot messier than a standard wood heater – and use a lot more wood. Traditionally these are installed in designated “Plant Rooms” or in the garage. Some units have optional glass firebox doors so you can install in your living room if you prefer
-
Three Models to Choose From
All three Dynamic series wood boilers are perfect for homes wanting to live off the grid and be self sufficient
-
Dynamic 2500 – Heats 25kW of hydronic water
At only 850mm high, this small wood boiler can product a max of 25kW of hot water (average at 18kW) Small firebox with rapid fast heat up = perfect for weekend homes or smaller homes wanting hydronic heating: Perfect for Plantroom or Garage Installation
-
Dynamic 3500 – Heats 35kW of hydronic water
Part wood heater – but mostly wood boiler, this unit can heat up to 80sm from the radiant heat while heating up to 35kW (average 25kW) of hot water. Can be installed inside and double as a wood heater
-
Belverdere 5000 – Heats 50kW of hydronic water
The largest in its range with a boiler that can heat up to 50kW of water ( average 35kW) and standing at 1,200mm high, it is a large unit. An optional glass door transforms your boiler into a combo heater that can now heat up to 60m2
-
How to Set up Your Home with Hydronic Heating
Before you buy a wood boiler, you need to work out not how many radiators you need, but how much heat it will take to heat your home – at Pivot we offer a free service to do this for you: this way you can make sure you are buying the right size boiler for your home
-
Complete Package
At Pivot we provide a full service of design, supply of all your hydronic gear (pumps, thermostats, radiators, manifolds, pipework etc) as well as a step by step manual on how to install for a the DIY installer (of the seasoned professional) – contact us to provide a full detailed quote
-
Made in Australia
These units are proudly made in Australia in Albury NSW
-
Hydronic Training Video: Pivot Stoves Hydronic System Trainign Video
Greg Parker-Hill from Pivot Stove & Heating runs through the set up and design of a wood fired hydronic system Covering all aspects of ” What is a Hydronic System” to ” Which Boiler” and ” how the pipe system works” – this is the updated training program used for Pivot Stove’s Staff For more – Check Out www.pivotstove.com.au
Pricing
Specifications
| 2500 | 3500 | 5000 | |
|---|---|---|---|
| Dimensions | |||
| Height | 850mm | 910mm | 1,200mm |
| Width | 400mm | 700mm | 585mm |
| Depth | 680mm | 560mm | 710mm |
| Weight | 120Kg | 220kg | 280Kg |
| Clearances from Combustible | |||
| Left | 25mm | 400mm | 100mm |
| Right | 25mm | 400mm | 100mm |
| Rear | 100mm | 125mm | 125mm |
| Flue | |||
| Diameter | 150mm | 150mm | 150mm |
| Position | Top | Top | Rear |
| Hot Water Performance | |||
| Max Hot Water capacity | 25kW | 35kW | 50kW |
| Optional Glass Door | |||
| Optional Glass Door | no | standard | optional |
Have a question about this product?
Fill out the form below to enquire now!
